Category Archives: rub rail installation

Announcing a New Rub Rail Installation Video on FISH TACO TV

We’ve got a new Rub Rail replacement video with Captain Mark Henderson from the Liquid Fire Fishing Team and Captain Danny Avila of Hammertime Sportfishing.

In this video, Henderson, our Strategic Product Category Manager, and Avila, our Account Services Representative, remove old, damaged Rub Rail from a 36-year-old Classic Mako 228 and replace it with new Vinyl Rub Rail from one of our TACO Marine Rub Rail Kits.

Removing the old Rub Rail from a 36-year-old Classic Mako 228.
After removing the old Rub Rail, there was a lot of dirt that needed to be cleaned off.
Henderson shows a handy trick – applying masking tape above where the Rub Rail will be mounted and marking with a pencil where to drill the new holes.

After removing the old Rub Rail, Henderson shows how to avoid damage spots and where to drill new pilot holes for screws. Additionally, Henderson discusses various quick and easy tricks to avoid Rub Rail heartache, including how to prevent the Insert from shrinking, how to make the Rub Rail more pliable and how to find the center point.

After warming the Rub Rail in the sun, Henderson and Avila find the center point, which will be mounted at the bow.
Henderson and Avila begin mounting the new Rub Rail.
Henderson saws off the excess Rub Rail at the stern.
Henderson applies the new Insert to the new Rub Rail. Inserts are great for covering up the screws while also absorbing most of the impact when at the dock.
Henderson attaches the Rub Rail End Cap to complete the seamless look.
Henderson applies a bead of waterproof sealant on the top and bottom of the new Rub Rail.

During the month of April 2018, we’re offering a $50 rebate with the purchase of any TACO Marine Vinyl Rub Rail Kit.

REDEEM HERE

Each kit includes a continuous coil of Rub Rail for a one-piece installation without a seam, a continuous coil Insert, end caps (when applicable), screws and an installation guide. You can find our Vinyl Rub Rail Kits at your favorite marine retailer and the Rub Rail rebate online at tacomarine.com.

All of our TACO Rub Rail is made in the USA and backed by our industry-leading 5-year warranty.

Check out the video below and visit YouTube.com/tacomarine for more FISH TACO TV How-To videos.

TACO Rub Rail Featured on Florida Sportsman Project Dreamboat Episode 2

Our partnership with Florida Sportsman Project Dreamboat continues in episode 2.

The professionals at Marine Customs Unlimited worked on a 23-foot Albury Brothers boat belonging to the owners of Shurhold Clean-N-Simple. The boat was in need of new paint, a custom dash panel and brand-new TACO Vinyl Rub Rail.

Robert Souza from Marine Customs Unlimited put brand new TACO Marine Vinyl Rub Rail on the Albury Brothers boat for Shurhold.

In minute 4:30, Robert Souza with Marine Customs Unlimited talks about installing new TACO Vinyl Rub Rail – choosing the color black to tie into the new custom paint job and dash panel renovation.

Attaching the Rub Rail to the hull exterior.
Gently heating the Rub Rail to easily bend around the nose of the bow.
Attaching the Rub Rail Insert.
Attaching the Rub Rail Insert.

As a leader in marine manufacturing, we remain committed and passionate about our products, including our extensive line of Rub Rail. For more information on our TACO Rub Rail and other products, visit tacomarine.com or fill out the contact form below.

Before the insert was applied.
After the insert was applied.

Watch the full episode below and stay tuned for Florida Sportsman Project Dreamboat episode 3!

Save $50 When You Purchase a TACO Marine Vinyl Rub Rail Kit

During the entire month of April, we’re offering a $50 rebate with the purchase of any TACO Marine Vinyl Rub Rail Kit – an exclusive deal that won’t last long.

REDEEM HERE


TACO Marine Rub Rail protects your boat against damage at the dock and also to enhances your boat’s appearance. Replacing damaged, worn out Rub Rail on your boat is an excellent and inexpensive way to give your boat a fresh new look with the added bonus of increasing its value.


We’ve designed and manufactured Rub Rail for leading boat builders for more than 50 years and offer a complete assortment of Vinyl Rub Rail Kits for all sizes of boats.


All seven of our Vinyl Rub Rail Kits come with one piece of continuous coil in Flexible or Semi-Rigid Vinyl Rub Rail with or without inserts and are backed by our industry-leading 5-year warranty guarantee.

Installing TACO Marine Rub Rail from a kit is easy! Check out this video with John Greviskis from Ship Shape TV showing you how to install Rub Rail.

DISCOVER MORE

For more information on our TACO Marine Vinyl Rub Rail Kits, visit tacomarine.com or fill out the contact form below.

Top 10 TACO Products You Need for Spring

It’s officially spring, which means it’s the perfect time for boat remodeling, renovation and equipment upgrades. Check out our top 10, must-have TACO products you need to get your boat ready for summer.

COMPLETE CATALOG


GRAND SLAM OUTRIGGER MOUNTS

Our Grand Slam Outrigger Mounts are perfect for anglers with any size boat up to and surpassing 50 feet. Manufactured with high-quality, durable stainless steel and machined aluminum, our Outrigger Mounts are guaranteed for years of trouble-free use and backed by our industry-leading 3-year warranty. For larger fishing boats, we offer our Grand Slam Professional Series Mounts, which are perfect for high-performance sport fishing at high speeds.

Safely adjust the Pro Series outrigger angle from underneath the hardtop without climbing on gunnels or leaving the deck.

DISCOVER MORE


OUTRIGGER POLES

Aluminum Tele-Outrigger Poles

Compliment your TACO Marine Outrigger Mounts with our Aluminum or Carbon Fiber Outrigger Poles. Our patented Aluminum Tele-Outrigger Poles are strong and sturdy, even in the roughest seas with multiple trolling lines. They pair with the Grand Slam 400, 380, 280, 170 or a striker base. The Aluminum Poles are available in 15- and 18-feet long.

Carbon Fiber Tele-Outrigger Poles

Our Carbon Fiber Tele-Outrigger Poles feature our patent-pending swivel rollers, which allow for a more natural bait presentation and provide less halyard line chafing, and our patent-pending Twist & Lock mechanism for easy pole installation. These pair with our Grand Slam Pro Series 450 and 500 Mounts and are available in 16- and 20-feet long.

Check out this video with Captain Ryan Peters from Miss Britt Charters and our TACO Marine Outrigger Top Mounts and Carbon Fiber Poles.

DISCOVER MORE


RIGGING KITS

Complete your TACO Outrigger system with one of our halyard line Rigging Kits. Choose from seven different kits for your outrigger needs, including a center rigger kit, the double mono rigging kit and the premium triple-braid rigging kit. These kits are designed to fill all your rigging needs to get you on the water quickly.

Captain Mark Henderson from the Liquid Fire Fishing Team shows how to quickly rig lines, attach swivels and pulleys, set the tension on the poles, attach the cord to the gunnel as well as how and where to attach your fishing line.

DISCOVER MORE


OUTRIGGER LINE TENSIONER

We also have the TACO Marine Outrigger Line Tensioner, which is designed for larger boats fishing with double or triple halyard lines on each outrigger. The Outrigger Line Tensioner helps keep proper tension on outrigger halyards while fully extended and tight.

With its easily adjustable halyard tension, it makes changing locations quick and easy – no more storing your halyard lines in order to make a move. Manufactured from stainless steel Type-316, the Outrigger Line Tensioner is adjustable for boats with 1- to 2-1/2-inch thick gunnels. It comes with an Easy Ronstan medium cam cleat for 1/8- to 1/2-inch thick rope and is backed by our 1-year warranty.

DISCOVER MORE


VINYL RUB RAIL KITS

Give your boat the ultimate face lift with brand new TACO Marine Rub Rail! Replacing outdated, faded or damaged Rub Rail is one of the quickest and low-cost solutions for improving your boat’s appearance. We offer seven premium Vinyl Rub Rail Kits, which are available in various sizes to match almost any boat on the market. Choose from Flexible Rub Rail, Semi-Rigid Rub Rail or Semi-Rigid with a Chrome Insert.

Installing your own Rub Rail is easy! We have a great video showing our various Rub Rail profiles and how you can install Rub Rail on your own boat.

DISCOVER MORE


DOCKSIDE ACCESSORIES

The Come On Board Rod Holder Mount accessory features a large grabbing surface with finger-molded pipe for a secure, comfortable grip.

Improve safety and accessibility with our Come On Board Handles. Easily step down onto gunnels while gripping the Come On Board Handle – helping to prevent dangerous slips and falls during boarding.

The Shore Power Cable Holder features a large ring that accommodates 30-, 50- and 100-amp power cables and is equipped with an adjustable height ring.

If you’re connected to shore power, do it safely with the adjustable TACO Marine Shore Power Cable Holder, which elevates power cables out of the water between your boat and the dock.

The Come On Board Handles, available with a rod holder base or a fixed base, are the ideal accessory for safe boarding.

DISCOVER MORE


TRANSOM CROSS TIE PORTABLE CLEAT

The Portable Locking Transom Cross Tie Cleat secures dock lines up and away from outboard motors and fits standard rod holders.

Prevent your dock lines from getting tangled in outboard props with our Transom Cross Tie – a 30-inch tall portable cleat that elevates lines up and away from motors when tying off at the stern. Our patent-pending latch mechanism at the base allows for easy insertion and hold into standard rod holders. Check out the video below for more on the Transom Cross Tie Portable Cleat.

Captain Mark Henderson of the Liquid Fire Fishing Team shows how to elevate stern lines using the TACO Marine Transom Cross Tie Portable Cleat.

DISCOVER MORE


QUICK RELEASE FENDER LOCK

Introducing the Quick Release Fender Lock – perfect for dockside safety and made with type-316 stainless steel. The Fender Lock comes with a 3-year warranty.

For dockside safety and convenience, our new TACO Marine Quick Release Fender Lock ensures secure, quickly stored fender lines. At the dock, you simply insert the pin into the fitting and your boat is protected with the fenders in an ideal position. When using chum bags, it’s a great way to never have to search for a place to hang it again!

Installing the TACO Marine Quick Release Fender Lock is easy! Captain Mark Henderson of the Liquid Fire Fishing Team walks us through the process.

DISCOVER MORE


ADJUSTABLE POLY FILET TABLES

Filet your fresh-caught fish on our easy-to-clean TACO Marine Adjustable Poly Filet Table, which is made from FDA-approved, high-density polyethylene that will not discolor, crack, mildew or absorb fish odors. Available in 20- and 30-inch widths, our filet tables are perfect for cutting bait, fileting fish or serving food and beverages. These tables also feature a storage slot to safely stow filet knives and fishing pliers. The universal, adjustable mount is corrosion resistant and made to fit all standard size rod holders. The quick release ergonomic knob allows for quick angle adjustment and flat storage when not being used. All fasteners are stainless marine grade quality.

Captain Mark Henderson of the Liquid Fire Fishing Team speaks about his experience with TACO Marine Adjustable Poly Filet Tables.

DISCOVER MORE


POLY DRINK HOLDERS

Lastly, equip your boat with one of our Poly Drink Holders, which are perfectly sized for tumblers up to 32 ounces, cans and water bottles. These made-in-the-USA drink holders are available as a single or double tumbler, with or without a cell phone or catch-all slot. Our Poly Tumbler Holders easily attach to boat surfaces with suction cups and are manufactured using UV-stabilized, high-density Polymer. This is a must-have, go-to accessory for any size boat!

DISCOVER MORE


For more information on all these great products and more, visit tacomarine.com or fill out the contact form below.

Enhance Your Boat with a TACO Marine Rub Rail Kit

As an industry leader, you may know TACO Marine has long been the preferred choice of boat builders for Rub Rail designed to meet their specific needs. However, we also offer easy-to-install Vinyl Rub Rail Kits – ideal for do-it-yourselfers and boaters looking for an affordable solution to spruce up the look and value of their boat.

Flexible Vinyl RRK NEW

Our made-in-the-USA Vinyl Rub Rail Kits come in a wide variety of sizes to fit all types of boats from 16- to 30-feet in length. Each kit includes a roll of seamless Rub Rail, matching insert, end caps, stainless steel screws and an installation guide.

The guide, along with a how-to video, are available for free online at tacomarine.com. You can also find the installation guide here and watch the video below.

In addition to our Vinyl Rub Rail Kits, we also offer a free Rub Rail Replacement Selection Guide if you prefer to try and match the original Rub Rail installed on your specific boat. You can access that guide here.

At TACO Marine, all our Rub Rail is backed by our exclusive 5-year warranty and guarantied to perform for many years to come. If you’re not sure which Rub Rail Kit is the right fit for your boat, please give us a call at 1-800-653-8567 and we can help you.

You can find TACO Marine Rub Rail and our Vinyl Rub Rail Kits online or through your favorite marine dealer, including West Marine and Bass Pro Shops. Please visit tacomarine.com for a complete listing.

Thank you for visiting TACO Marine at the 2017 METSTRADE show!

Thank you for stopping by the TACO Marine® stand at the Brunger Export aisle in the USA Pavilion during the 2017 METSTRADE show!

TACO Metals® is a global leader in the recreational marine industry and the most trusted source for rub rail, seating and pedestals, specialty marine hardware, marine fabrication and sport fishing products. The TACO Marine division of TACO Metals is known for its new product development using the latest in design and manufacturing capabilities to create solutions that provide the best total value, enhanced product performance and uncompromising quality. Boat builders, marine product manufacturers, repair yards, distributors and retailers have trusted and relied on TACO Marine for premium products, distribution expertise and unsurpassed customer support since 1959.

We are excited for the opportunity to support you in your needs with any one of our several product lines we have to offer. To view our company and the full range of products, you can visit us at tacomarine.com. You will also receive a follow up contact from a Brunger Export Sales Representative in your region to review any questions you may have about the TACO Marine line and you’ll be able to set up an appointment, if needed. You can also view Brunger Export’s website at brungerexport.com for additional information.

We look forward to working with you in the near future.

TACO Products to see at METSTRADE!

TACO Marine® to feature longer Command Ratchet Hinge, easy-to-install Rub Rail kits and more at METSTRADE, Nov. 14-16, in Brunger Export Stand 12.408, Amsterdam RA.

H25-0023 topIntroducing the TACO Marine® Command Ratchet Hinge 18-1/2-in. long – a high-grade stainless steel and brass hinge ideal for sun pads, bolsters and lounge backrests.

This longer ratchet hinge allows for one locking position at 61.5 degrees that is 2-in. tall and 2-1/4-in. wide.

The Command Ratchet Hinge mounts above deck and can be used for seat backs up to 22 in. – perfect for single- or double-seat capacity and tested up to 500-ft. pounds of torque per pair and 600-pounds of vertical load on a 22-in. seat back.

 

Flexible Vinyl RRK NEW

 

We will also feature easy-to-install TACO Marine® Rub Rail kits. While rub rail is primarily designed to protect a boat, it is also a great way to upgrade its value and appearance with a bright new look and accent.

We offer a full product line of rub rail kits for all sizes of boats, in a convenient and easy carry box that’s also easy to ship. Each kit includes all items needed for full replacement of rub rail, including stainless steel fasteners, end caps and, in some profiles, the insert.

 

Interior: Part 19 – Taco Marine Project Boat on Ship Shape TV.

Taco Marine Project Boat

Changing out the headliner or interior walls of your boat? 

Part 19 of the Taco Marine Project Boat provides 3 time-saving tips for installing headliners and wall coverings.

1. Scrap the scraper for removing old glue or contact cement – we have a couple of time-saving tips for you. 2. Use a fabric track to hide uneven surfaces. 3. Fabric tips: Learn about what kind of interior fabrics work best for wear and tear, even a fabric that is bleach resistant. Watch Part 19 of the Taco Marine Project Boat Here. 

Taco Marine and Ship Shape TV join forces to benefit the I’M LOGAN IT Foundation.

Taco Marine Project Boat

Miami International Boat Show

The Taco Marine Project Boat, currently featured on Ship Shape TV, is a series of episodes of the full renovation of a neglected 1989, Pursuit 2650 boat. Now that the boat’s rehab is in the final stages, it will be on public display for the first time. See it at the Center Court at the 2017 Progressive Insurance Miami International Boat Show, February 16th to 20th, at Miami Marine Stadium Park in Key Biscayne, Florida.

The Taco Marine Project Boat showcases innovative products from more than 30 of the marine industry’s leading equipment and accessories suppliers, including Armstrong Nautical Products, Boat Outfitters, Canvas Designers, Glen Raven Custom Fabrics, Magic Tilt Trailers, Pacer Group, Quantum Paints, Taylor Made Systems, T-N-T Custom Boatworks, VectorWorks and Yamaha Outboards.

rub rail selection tipsJohn Greviskis, host of Ship Shape TV, will be on hand
throughout the boat show to Ship Shape TV logodiscuss the project boat and many of the products that have been installed on the Taco Marine Project Boat. Representatives from Taco Marine and other participating suppliers will also be on hand to answer your questions.

When completed later this year, the totally updated and like-new boat will be auctioned off and the proceeds will benefit the I’M LOGAN IT Foundation* (created by the Kushner family in loving memory of Logan Matthew Kushner – visit IMLoganIT.com for more information).

I'm Logan It Foundation logoThe I’M LOGAN IT non-profit foundation raises money for the Juvenile Diabetes Research Fund (JDRF) and provides college scholarships for student athletes who exhibit similar values and qualities as Logan Kushner – including a strong sense of leadership, resilient in spirit, team pride, good sportsmanship and helping others.

Miami International Boat ShowFor additional information on the Taco Marine Project Boat, visit the Center Court display at the Progressive® Insurance Miami International Boat Show. To see what has been done, and watch the final process of rehabbing the project boat with photos and videos, go to the TacoMarineProjectBoat.com blog.

A special thank you: Taco Marine appreciates the support provided by NMMA and Miami International Boat Show.

Taco Marine is excited to have the support of some of the marine industry’s leading equipment and accessories suppliers:

Ship Shape TV and taco Marine

 

*The I’M LOGAN IT Foundation is a charitable fund maintained by the Pinellas Community Foundation (PCF), a Section 501(c)(3) non-profit organization. Your contribution is tax deductible to the extent allowed by law. PO Box 307, Safety Harbor, FL 34695-0307

Christmas Stuffers for Big Stockings …

Adjustable filet tableLeave Santa milk and cookies on this Adjustable Poly Filet TableThis clever  filet table fits in and adjusts to any degree rod holder, levels out flat and locks in the position you need. It also has slots for a filet knife and fishing pliers. This high-strength table will not crack, mildew, discolor, or absorb fish odors – plus it’s easy to clean. It comes in two sizes and all the components are made in the USA.  Find it here at iBoats.

Reel in this Taco Marine stocking stuffer and it could be the-catch-of-the-day for Christmas …

Reel hanger for boatsReel hanger for fishing rodsReel Hangers with Rod Tip Holder Kit. The easy-to-adjust hangers accommodate a wide variety of reel sizes. The stainless steel hangers mount horizontally, vertically or overhead with spring-loaded clips to secure reels safely in place – even in rough seas. The set includes rod tip holders with spring-activated snap locks.

If you don’t find a genuine Taco Marine Rub Rail kit in your stocking, it may be because Santa put it under the tree or used it on his sleigh – to protect chimneys of course. Because Taco Marine is the largest producer of rub rail for boat builders, Santa recommends that you click here for a Free Rub Rail Replacement Guide. It helps you find  the original installed on your boat, what to buy and you can select from many types, styles and colors of rub rail. A Taco Marine Rub Rail Kit may not be a stocking stuffer, but it makes an easy gift to put under the tree.

Rub rail

 

Click here to go to West Marine to find the Taco Marine Rod Holder and Rub Rail Kit products.