Tag Archives: rub rail

Announcing a New Rub Rail Installation Video on FISH TACO TV

We’ve got a new Rub Rail replacement video with Captain Mark Henderson from the Liquid Fire Fishing Team and Captain Danny Avila of Hammertime Sportfishing.

In this video, Henderson, our Strategic Product Category Manager, and Avila, our Account Services Representative, remove old, damaged Rub Rail from a 36-year-old Classic Mako 228 and replace it with new Vinyl Rub Rail from one of our TACO Marine Rub Rail Kits.

Removing the old Rub Rail from a 36-year-old Classic Mako 228.
After removing the old Rub Rail, there was a lot of dirt that needed to be cleaned off.
Henderson shows a handy trick – applying masking tape above where the Rub Rail will be mounted and marking with a pencil where to drill the new holes.

After removing the old Rub Rail, Henderson shows how to avoid damage spots and where to drill new pilot holes for screws. Additionally, Henderson discusses various quick and easy tricks to avoid Rub Rail heartache, including how to prevent the Insert from shrinking, how to make the Rub Rail more pliable and how to find the center point.

After warming the Rub Rail in the sun, Henderson and Avila find the center point, which will be mounted at the bow.
Henderson and Avila begin mounting the new Rub Rail.
Henderson saws off the excess Rub Rail at the stern.
Henderson applies the new Insert to the new Rub Rail. Inserts are great for covering up the screws while also absorbing most of the impact when at the dock.
Henderson attaches the Rub Rail End Cap to complete the seamless look.
Henderson applies a bead of waterproof sealant on the top and bottom of the new Rub Rail.

During the month of April 2018, we’re offering a $50 rebate with the purchase of any TACO Marine Vinyl Rub Rail Kit.

REDEEM HERE

Each kit includes a continuous coil of Rub Rail for a one-piece installation without a seam, a continuous coil Insert, end caps (when applicable), screws and an installation guide. You can find our Vinyl Rub Rail Kits at your favorite marine retailer and the Rub Rail rebate online at tacomarine.com.

All of our TACO Rub Rail is made in the USA and backed by our industry-leading 5-year warranty.

Check out the video below and visit YouTube.com/tacomarine for more FISH TACO TV How-To videos.

Time is Running Out! Get $50 Back On Any TACO Vinyl Rub Rail Kit

There’s only two weeks left to cash-in on a $50 rebate with the purchase of any TACO Marine® Vinyl Rub Rail Kit – an exclusive deal that won’t last long. Find these kits at your favorite marine retailer today.

REDEEM HERE


TACO Marine® Rub Rail protects your boat against damage at the dock and also to enhances your boat’s appearance. Learn how easy it is to replace your boat’s Rub Rail in an exclusive FISH TACO TV video with Captain Mark Henderson below.


All seven of our Vinyl Rub Rail Kits come with one piece of continuous coil in Flexible or Semi-Rigid Vinyl Rub Rail with or without inserts and are backed by our industry-leading 5-year warranty guarantee.


TACO Rub Rail featured on Florida Sportsman Project Dreamboat episode 2.

DISCOVER MORE

View the complete TACO Marine catalog for FREE here.

For more information about our Vinyl Rub Rail Kits and our extensive line of Rub Rail, visit tacomarine.com or fill out the contact form below.

TACO Rub Rail Featured on Florida Sportsman Project Dreamboat Episode 2

Our partnership with Florida Sportsman Project Dreamboat continues in episode 2.

The professionals at Marine Customs Unlimited worked on a 23-foot Albury Brothers boat belonging to the owners of Shurhold Clean-N-Simple. The boat was in need of new paint, a custom dash panel and brand-new TACO Vinyl Rub Rail.

Robert Souza from Marine Customs Unlimited put brand new TACO Marine Vinyl Rub Rail on the Albury Brothers boat for Shurhold.

In minute 4:30, Robert Souza with Marine Customs Unlimited talks about installing new TACO Vinyl Rub Rail – choosing the color black to tie into the new custom paint job and dash panel renovation.

Attaching the Rub Rail to the hull exterior.
Gently heating the Rub Rail to easily bend around the nose of the bow.
Attaching the Rub Rail Insert.
Attaching the Rub Rail Insert.

As a leader in marine manufacturing, we remain committed and passionate about our products, including our extensive line of Rub Rail. For more information on our TACO Rub Rail and other products, visit tacomarine.com or fill out the contact form below.

Before the insert was applied.
After the insert was applied.

Watch the full episode below and stay tuned for Florida Sportsman Project Dreamboat episode 3!

Save $50 When You Purchase a TACO Marine Vinyl Rub Rail Kit

During the entire month of April, we’re offering a $50 rebate with the purchase of any TACO Marine Vinyl Rub Rail Kit – an exclusive deal that won’t last long.

REDEEM HERE


TACO Marine Rub Rail protects your boat against damage at the dock and also to enhances your boat’s appearance. Replacing damaged, worn out Rub Rail on your boat is an excellent and inexpensive way to give your boat a fresh new look with the added bonus of increasing its value.


We’ve designed and manufactured Rub Rail for leading boat builders for more than 50 years and offer a complete assortment of Vinyl Rub Rail Kits for all sizes of boats.


All seven of our Vinyl Rub Rail Kits come with one piece of continuous coil in Flexible or Semi-Rigid Vinyl Rub Rail with or without inserts and are backed by our industry-leading 5-year warranty guarantee.

Installing TACO Marine Rub Rail from a kit is easy! Check out this video with John Greviskis from Ship Shape TV showing you how to install Rub Rail.

DISCOVER MORE

For more information on our TACO Marine Vinyl Rub Rail Kits, visit tacomarine.com or fill out the contact form below.

Top 10 TACO Products You Need for Spring

It’s officially spring, which means it’s the perfect time for boat remodeling, renovation and equipment upgrades. Check out our top 10, must-have TACO products you need to get your boat ready for summer.

COMPLETE CATALOG


GRAND SLAM OUTRIGGER MOUNTS

Our Grand Slam Outrigger Mounts are perfect for anglers with any size boat up to and surpassing 50 feet. Manufactured with high-quality, durable stainless steel and machined aluminum, our Outrigger Mounts are guaranteed for years of trouble-free use and backed by our industry-leading 3-year warranty. For larger fishing boats, we offer our Grand Slam Professional Series Mounts, which are perfect for high-performance sport fishing at high speeds.

Safely adjust the Pro Series outrigger angle from underneath the hardtop without climbing on gunnels or leaving the deck.

DISCOVER MORE


OUTRIGGER POLES

Aluminum Tele-Outrigger Poles

Compliment your TACO Marine Outrigger Mounts with our Aluminum or Carbon Fiber Outrigger Poles. Our patented Aluminum Tele-Outrigger Poles are strong and sturdy, even in the roughest seas with multiple trolling lines. They pair with the Grand Slam 400, 380, 280, 170 or a striker base. The Aluminum Poles are available in 15- and 18-feet long.

Carbon Fiber Tele-Outrigger Poles

Our Carbon Fiber Tele-Outrigger Poles feature our patent-pending swivel rollers, which allow for a more natural bait presentation and provide less halyard line chafing, and our patent-pending Twist & Lock mechanism for easy pole installation. These pair with our Grand Slam Pro Series 450 and 500 Mounts and are available in 16- and 20-feet long.

Check out this video with Captain Ryan Peters from Miss Britt Charters and our TACO Marine Outrigger Top Mounts and Carbon Fiber Poles.

DISCOVER MORE


RIGGING KITS

Complete your TACO Outrigger system with one of our halyard line Rigging Kits. Choose from seven different kits for your outrigger needs, including a center rigger kit, the double mono rigging kit and the premium triple-braid rigging kit. These kits are designed to fill all your rigging needs to get you on the water quickly.

Captain Mark Henderson from the Liquid Fire Fishing Team shows how to quickly rig lines, attach swivels and pulleys, set the tension on the poles, attach the cord to the gunnel as well as how and where to attach your fishing line.

DISCOVER MORE


OUTRIGGER LINE TENSIONER

We also have the TACO Marine Outrigger Line Tensioner, which is designed for larger boats fishing with double or triple halyard lines on each outrigger. The Outrigger Line Tensioner helps keep proper tension on outrigger halyards while fully extended and tight.

With its easily adjustable halyard tension, it makes changing locations quick and easy – no more storing your halyard lines in order to make a move. Manufactured from stainless steel Type-316, the Outrigger Line Tensioner is adjustable for boats with 1- to 2-1/2-inch thick gunnels. It comes with an Easy Ronstan medium cam cleat for 1/8- to 1/2-inch thick rope and is backed by our 1-year warranty.

DISCOVER MORE


VINYL RUB RAIL KITS

Give your boat the ultimate face lift with brand new TACO Marine Rub Rail! Replacing outdated, faded or damaged Rub Rail is one of the quickest and low-cost solutions for improving your boat’s appearance. We offer seven premium Vinyl Rub Rail Kits, which are available in various sizes to match almost any boat on the market. Choose from Flexible Rub Rail, Semi-Rigid Rub Rail or Semi-Rigid with a Chrome Insert.

Installing your own Rub Rail is easy! We have a great video showing our various Rub Rail profiles and how you can install Rub Rail on your own boat.

DISCOVER MORE


DOCKSIDE ACCESSORIES

The Come On Board Rod Holder Mount accessory features a large grabbing surface with finger-molded pipe for a secure, comfortable grip.

Improve safety and accessibility with our Come On Board Handles. Easily step down onto gunnels while gripping the Come On Board Handle – helping to prevent dangerous slips and falls during boarding.

The Shore Power Cable Holder features a large ring that accommodates 30-, 50- and 100-amp power cables and is equipped with an adjustable height ring.

If you’re connected to shore power, do it safely with the adjustable TACO Marine Shore Power Cable Holder, which elevates power cables out of the water between your boat and the dock.

The Come On Board Handles, available with a rod holder base or a fixed base, are the ideal accessory for safe boarding.

DISCOVER MORE


TRANSOM CROSS TIE PORTABLE CLEAT

The Portable Locking Transom Cross Tie Cleat secures dock lines up and away from outboard motors and fits standard rod holders.

Prevent your dock lines from getting tangled in outboard props with our Transom Cross Tie – a 30-inch tall portable cleat that elevates lines up and away from motors when tying off at the stern. Our patent-pending latch mechanism at the base allows for easy insertion and hold into standard rod holders. Check out the video below for more on the Transom Cross Tie Portable Cleat.

Captain Mark Henderson of the Liquid Fire Fishing Team shows how to elevate stern lines using the TACO Marine Transom Cross Tie Portable Cleat.

DISCOVER MORE


QUICK RELEASE FENDER LOCK

Introducing the Quick Release Fender Lock – perfect for dockside safety and made with type-316 stainless steel. The Fender Lock comes with a 3-year warranty.

For dockside safety and convenience, our new TACO Marine Quick Release Fender Lock ensures secure, quickly stored fender lines. At the dock, you simply insert the pin into the fitting and your boat is protected with the fenders in an ideal position. When using chum bags, it’s a great way to never have to search for a place to hang it again!

Installing the TACO Marine Quick Release Fender Lock is easy! Captain Mark Henderson of the Liquid Fire Fishing Team walks us through the process.

DISCOVER MORE


ADJUSTABLE POLY FILET TABLES

Filet your fresh-caught fish on our easy-to-clean TACO Marine Adjustable Poly Filet Table, which is made from FDA-approved, high-density polyethylene that will not discolor, crack, mildew or absorb fish odors. Available in 20- and 30-inch widths, our filet tables are perfect for cutting bait, fileting fish or serving food and beverages. These tables also feature a storage slot to safely stow filet knives and fishing pliers. The universal, adjustable mount is corrosion resistant and made to fit all standard size rod holders. The quick release ergonomic knob allows for quick angle adjustment and flat storage when not being used. All fasteners are stainless marine grade quality.

Captain Mark Henderson of the Liquid Fire Fishing Team speaks about his experience with TACO Marine Adjustable Poly Filet Tables.

DISCOVER MORE


POLY DRINK HOLDERS

Lastly, equip your boat with one of our Poly Drink Holders, which are perfectly sized for tumblers up to 32 ounces, cans and water bottles. These made-in-the-USA drink holders are available as a single or double tumbler, with or without a cell phone or catch-all slot. Our Poly Tumbler Holders easily attach to boat surfaces with suction cups and are manufactured using UV-stabilized, high-density Polymer. This is a must-have, go-to accessory for any size boat!

DISCOVER MORE


For more information on all these great products and more, visit tacomarine.com or fill out the contact form below.

Enhance Your Boat with a TACO Marine Rub Rail Kit

As an industry leader, you may know TACO Marine has long been the preferred choice of boat builders for Rub Rail designed to meet their specific needs. However, we also offer easy-to-install Vinyl Rub Rail Kits – ideal for do-it-yourselfers and boaters looking for an affordable solution to spruce up the look and value of their boat.

Flexible Vinyl RRK NEW

Our made-in-the-USA Vinyl Rub Rail Kits come in a wide variety of sizes to fit all types of boats from 16- to 30-feet in length. Each kit includes a roll of seamless Rub Rail, matching insert, end caps, stainless steel screws and an installation guide.

The guide, along with a how-to video, are available for free online at tacomarine.com. You can also find the installation guide here and watch the video below.

In addition to our Vinyl Rub Rail Kits, we also offer a free Rub Rail Replacement Selection Guide if you prefer to try and match the original Rub Rail installed on your specific boat. You can access that guide here.

At TACO Marine, all our Rub Rail is backed by our exclusive 5-year warranty and guarantied to perform for many years to come. If you’re not sure which Rub Rail Kit is the right fit for your boat, please give us a call at 1-800-653-8567 and we can help you.

You can find TACO Marine Rub Rail and our Vinyl Rub Rail Kits online or through your favorite marine dealer, including West Marine and Bass Pro Shops. Please visit tacomarine.com for a complete listing.

Rub Rail Installation on the Taco Marine Project Boat – Part 11

Rub rail selection

Taco Marine’s Project Boat on Ship Shape TV, Part 11 blog is all about Rub Rail Installation and Selection. For rub rail installation tips on measuring, caulking, attaching, bending and trimming rub rail, go to: https://tacomarineprojectboat.com

How to Choose the Right Rub Rail Utilizing Taco Marine’s New Replacement Guide

rub rail replacement guideTaco Marine announces the most comprehensive and time-saving rub rail replacement guide in the industry. This rub rail selection guide includes a new reference feature that helps speed up the process of selecting the proper rub rail for the most popular boats in the marketplace.

Boaters need to have the most accurate method to determine which rub rail is best for their boat, so the new Taco Marine rub rail replacement guide includes more boat builders than ever before. Now rub rail replacement decisions are easily made with references to specific boat builders and multiple rub rail profile versions of Easy to replace rub rail with taco Marines handy guideeach. This feature now provides a better method for matching a boat’s existing rub rail – boaters can also make choices for the rub rail’s profile, color, and type of material that best fits their boat.

Taco Marine rub railIncluded in the rub rail replacement guide is additional handy information on how to estimate the length of the rub rail material needed, required tools, installation tips and references on where to buy Taco Marine rub rail.

The Taco Marine Rub Rail Replacement Guide can be found and downloaded as a PDF file or as an online catalog,  just click here.

Watch a video on how high quality rub rail is manufactured: 

This holiday weekend, check to see if your boat’s rub rail is tired looking, faded or just plain beat up.

rub rail weekendThis 4th of July weekend, as you are getting your boat ready for a great time on the water, check to see if your rub rail is doing what it’s suppose to be doing – protecting your boat. If your rub rail needs replacing – now’s the time to evaluate it and plan how you go about replacing it. First is to find a company that makes a replacement rub rail for your boat. It just so happens that Taco Marine is the largest producer of rub rail and makes replacement rub rail for over 75 different boating companies – so that’s a good place to start.

high quality rub rail materials
We select the highest quality rub rail materials.
precision manufacturing processes when manufacturing Taco Marine rub rail
Another precision manufacturing process.

Most important, make sure the rub rail you do end up buying is from a company that specializes in it and is known for quality production. Some companies use less expensive materials to hold down costs, but do you really want to replace your rub rail again – sooner rather than later? Do you really want to have your replacement rub rail look faded in a couple of years? The video to the right shows the pride our employees take in selecting the highest grade vinyl, and at the end of the manufacturing line we have a technician who measures the width in thousands of an inch! Why is that so important? Because when it comes time to install the rub rail, you want to have a consistent look and fit after putting your effort into the project.

Taco Marine manufacturers a wide variety of rub rail
We manufacturer hight quality rub rail for over 75 boat builders.

Rub rail is one product where you want to buy the best quality because you are either going to take your valuable time to install it or pay someone else to – and you don’t want to be in the middle on an installation and have to return a product that just isn’t working and then have to start over. Just buy the best quality rub rail and the whole replacement process will be easier,5 year warranty on Taco Marine rub rail and the end result will last much longer. Taco Marine’s five year warranty for rub rail is the ultimate support for your investment.

We can help you. Taco Marine has all types of rub rail; flexible, rigid, and semi-rigid vinyl, different colors, chrome and stainless steel rub rail, rub rail inserts, and even kits for doing-it-yourself, – and rub rail for over 75 different boat builders! Click here to go to the list of boat manufactures and the rub rail selection guide: http://tacomarine.com/cat–Rub-Rail-Selection-Guide–OEM-Rub-Rail-Replacement.html   Also on that page is an Online Book that has everything you need to know about buying replacement rub rail, including tips for measuring, estimating, tools and supplies you’ll need. To find a store near you, click here.