Tag Archives: tacomarine

TACO Marine Showcasing Popular LED Lights at Miami Boat Show, Booth C199

We’re gearing up for the Progressive® Miami International Boat Show Feb. 15 –19 in booth C199. We’ll be showcasing many of our innovative marine products, including our premium line of LED Deck and Navigation Lights.

TACO 3-LED Flat Mount deck lights are ideal for hard top, consoles, interior cabins, under gunnels and bait wells – available in red or blue.
TACO 4-LED Flat Mount deck lights are available in powerful 700-lumen white light, white or black housing, and feature a 100-degree beam.
TACO 3-LED Pipe Mount deck lights are ideal for T-Tops, towers, railings, poling platforms and leaning posts – available in red or blue.
TACO 4-LED Pipe Mount deck lights are available in powerful 700-lumen white light and feature a 100-degree spread beam angle.
The TACO T-Top LED Pipe Mount lights are perfect for T-Tops, towers and railings. These powerful 1080-lumen lights are available in white-to-blue or white-to-red.
The TACO T-Top Tube Light with aluminum housing is an attractive, durable and bright LED – available in white-with-blue and white-with-red in polished anodized aluminum.

These TACO Marine LED Lights are IP67 waterproof (non-submersible) and come with our 1-year warranty guarantee. For a limited time, buy two TACO Marine LED lights and receive a $25 rebate. 

For more information on our TACO Marine LED Lights, visit tacomarine.com or fill out the contact form below.

Announcing Two More Exclusive Rebates from TACO Marine

For two months, we’re offering exclusive rebates on some of our most popular boating accessories – LED lights, the Shore Power Cable Holder and the Come On Board Handle.

CLICK HERE FOR TERMS AND CONDITIONS

Our premium line of LED lights are ignition protection certified by the United States Coast Guard, the International Organization for Standardization and SAE International.*

All of our LED Lights are impact resistant, totally-sealed waterproof and manufactured to withstand the rigors of marine and other outdoor environments. Our highly-efficient hardwired LED Lights provide 75,000 hours of operation with a low draw of less than one amp – preventing battery drain. We offer a wide variety of premium LED lights, mounts and bezel options for the perfect illumination on your boat.

Read more about our TACO Marine LED lights here.

Our Shore Power Cable Holder is the ideal accessory for boats connecting to a power source at a marina. The large ring design accommodates 30-, 50- and 100-amp shore power cables and features an adjustable height ring to compensate for low or high tide.

TACO Marine Shore Power Cable Holder

Discover more incredible features about the Shore Power Cable Holder here.

The Come On Board Handle rebate is good for either the Fixed Base Mount or Rod Holder Mount version of this must-have accessory.

TACO Marine Come On Board Handle – Fixed Base Mount

The Fixed Based Mount attaches permanently to the gunnel or transom platform mount.

TACO Marine Come On Board Handle – Rod Holder Mount

The Rod Holder Mount easily sets into any rod holder and features a solid gimbal mount design for secure locking placement.

Both the Fixed Base and Rod Holder mounts are constructed using type-304 stainless steel with a unique finger-molded groove handle for a comfortable grip. Both handles feature a multiple piece design for easy storage and come with a TACO Marine one-year warranty guarantee.

* USCG, ISO and SAE certified for Ignition Protection. Completely sealed lights have been tested in an explosive environment and exposed to an explosive atmosphere in high temperature that includes powering on-off 50 times without igniting the atmosphere at a temperature not exceeding 200 degree C. These certificates demonstrate the ability to consistently provide product that meets statutory and regulatory requirements that assure customer satisfaction and safety. Ideal for use in engine rooms, battery compartments and anywhere fire safety is of most importance.

For more information on our innovative TACO Marine products, visit tacomarine.com or fill out the contact form below.

Cash In on $200 Rebate Incentive Before Times Runs Out

If you purchase a TACO Marine Capri, Coastal or Captiva Helm Chair between Jan. 10 and Feb. 11, 2018, you can receive a $200 exclusive rebate!

Our made-in-the-USA Helm Chairs are constructed with durable, corrosion-resistant materials and carry our TACO Marine 3-year warranty guarantee.

We use marine-grade stainless steel, anodized aluminum alloys and injection-molded resins to ensure long-lasting protection from constant exposure to the harsh elements of sun and saltwater.

Click here for complete terms and conditions.

Discover more about our elite line of Helm Chairs at tacomarine.com. You can also request more information by filling out the contact form below.

Enhance Boat, Improve On-The-Water Safety with TACO LED Lights

Safety and visibility are top priorities for boaters. At TACO Marine, we’ve created a premium line of LED lights that are ignition protection certified by the United States Coast Guard, the International Organization for Standardization and SAE International.*

All of our LED Lights are impact resistant, totally-sealed waterproof and manufactured to withstand the rigors of marine and other outdoor environments. Our highly-efficient hardwired LED Lights provide 75,000 hours of operation with a low draw of less than one amp – preventing battery drain. We offer a wide variety of premium LED lights, mounts and bezel options for the perfect illumination on your boat.

Our 3- and 4-LED Light Flat Mounts are unique, low-profile multipurpose lights – ideal for hard tops, consoles, interior cabins, the underside of gunnels, engine rooms and bait wells.

The 3-LED Deck Light is available in white, black or aluminum housing and blue or red LED with a powerful 540-lumen output and a 100-degree spread beam angle. The 4-LED Deck Light is available in white, black or aluminum housing with white LED. This 4-LED option delivers an 700-lumen output with a 100-degree beam angle.

Easily secure the Flat Mount lights using a stainless-steel swivel bracket or 3M adhesive tape.

We also offer both the 3- and 4-LED Deck Lights for Pipe Mount. With the same incredible features as their Flat Mount counterparts, the Pipe Mount lights bolt directly to 1-inch schedule 40 pipe. The Pipe Mount lights are ideal for T-tops, towers, railings and poling platforms.

Both the Flat and Pipe Mount lights include a wire chafe guard for running wire through tube or pipe. These lights are all USCG, ISO and SAE certified for ignition protection* and are 8.0-watt equivalents to a 55-watt halogen flood light. The Flat and Pipe Mount lights consume minimal power, using less than 1 amp.

The Flat and Pipe Mount lights come with our TACO Marine one-year warranty guarantee.

For all these great products and more, visit tacomarine.com or fill out the contact form below.

* USCG, ISO and SAE certified for Ignition Protection. Completely sealed lights have been tested in an explosive environment and exposed to an explosive atmosphere in high temperature that includes powering on-off 50 times without igniting the atmosphere at a temperature not exceeding 200 degree C. These certificates demonstrate the ability to consistently provide product that meets statutory and regulatory requirements that assure customer satisfaction and safety. Ideal for use in engine rooms, battery compartments and anywhere fire safety is of most importance.

TACO Marine to Feature New Outrigger Line Tensioner at Upcoming Miami Boat Show

Introducing the NEW TACO Marine Outrigger Line Tensioner – ideal for high-performance fishing boats with multiple lines on each outrigger and to be featured at the Miami International Boat Show Feb. 15 through 19.

The NEW TACO Marine Outrigger Line Tensioner.

The Outrigger Line Tensioner is perfect for rigging to the gunnel on the boat. The Tensioner is constructed using 316 stainless steel with a high-polished mushroom head threaded bolt and a heavy-duty lock washer to prevent loosening from vibration. It’s finished with a Ronstan medium cam cleat for 1/8- to 1/2-inch rope.

For easy installation, use a 3/4-inch drill bit through the gunnel and secure with 18-8 stainless-steel mounting hardware, which is included in the packaging. The tensioner bracket is electro polished with countersunk mounting holes.

The Outrigger Line Tensioner comes equipped with our TACO Marine three-year warranty guarantee.

For all our TACO Marine products, visit tacomarine.com or fill out the contact form below.

Thank You For Visiting TACO Marine at the REFIT Trade Show

Thank you for stopping by the TACO Marine booth at the REFIT International Exhibition & Conference Jan. 10 and 11.

Category Product Manager Jose Chao and Aftermarket & Export Sales Manager Phillip Taschioglou worked the TACO Marine booth at the REFIT International Exhibition & Conference Jan. 10 and 11, 2018.

REFIT brings together marine manufacturers, OEM boat builders, yacht owners, boat yards, captains and other key industry members. It is a great opportunity for networking and to obtain important information from within the marine industry.

The show also hosted special seminars created by a panel of yacht owners. Seminar topics included maritime security threats, a captain’s round table, ABYC and international standards and refit management.

From TACO Marine, we had the pleasure of showcasing our premium helm seating line, dockside accessories, LED lights, Rub Rail profiles and our Grand Slam 890 Universal Top Mount.

As the marine industry continues to evolve, TACO continues to innovate – developing a variety of high-performance marine products to carry our customers into the future.

For more information on all our TACO Marine products, visit tacomarine.com, call 1-800-653-8568 or send an e-mail to info@tacomarine.com.

Receive a $200 Rebate with TACO Marine® Helm Chair Purchase

Purchase a TACO Marine® Capri, Coastal or Captiva Helm Chair between Jan. 10 and Feb. 11, 2018 and you can receive a $200 rebate!

Find the complete rebate, terms and conditions and mail-in form here and at the bottom of this post.

In the video below, TACO Marine Aftermarket & Export Sales Manager Phillip Taschioglou explains the features and benefits of the Capri Helm Chair Deluxe.

Capri Premium Helm Chairs

Our Capri Helm Chairs come in three variations – the Standard, Deluxe and Bench Chair Deluxe.

The Standard Capri Helm Chair is available with and without armrests, with and without a fixed seat bottom and comes complete with plush foam padding and premium marine-grade vinyl fabric.

The Deluxe Capri Helm Chair, ideal for larger boats, is available with and without adjustable armrests and bolster. Its universal hole pattern fits most spider mounts, seat slides and pedestals, and features a durable fiberglass seat back.

The Deluxe Bench Capri Helm Chair, which includes all the amazing features of the Standard and Deluxe Helm Chairs, comes in either 36- or 40-inches wide.

All of our Capri Helm Chairs are available custom made in a variety of colors, including, but not limited to, light gray, vanilla, black and white.

Captiva Helm Chairs

The Captiva Helm Chair has a stylish inset design and comes standard with rollback bolster cushion, allowing the chair to be used in a leaning position or elevated docking visibility feature at the helm. The Captiva Helm Chair series is also available in comfortable 23-inch size, allowing multiple chairs side-by-side if needed.

Made in the USA, this helm chair is constructed with premium quality marine-grade vinyl treated with anti-microbial and UV stabilizers. The Captiva series features padded vinyl seat back panel, plush foam padding for durable support and marine-grade materials construction.

For boat builders, custom vinyl options are also available. These chairs are built to ABYC H31 standards for permanently installed seating systems in boats and carry the TACO Marine® industry leading three-year warranty.

Coastal Helm Chairs

The Coastal Helm Chair comes in Standard 19-inch or Deluxe 20-inch options and is ideal for smaller crafts up to 25-feet in length.

The Standard has a fixed seat bottom and is available with and without armrests. The Deluxe has an adjustable bolster and includes fixed armrests. Both versions have an universal hole pattern that fits most spider mounts, seat slides and pedestals on the market today.

For more information on all our TACO Marine Helm Chairs, visit tacomarine.com, fill out the contact form below or call 1-800-653-8568 today.